Updated 6 February 2025

Gate remotes have become an essential part of modern security and convenience, allowing homeowners to operate their gates without leaving the comfort of their vehicles. These devices use radio signals to communicate with your gate’s motor, making them an integral feature of automated gate systems. If you’ve just acquired a new gate remote or need to reset an old one, this guide will walk you through the basics of gate remote programming and explore the benefits of these handy devices.

What Are Gate Remotes?

Gate remotes are small, wireless devices designed to control automatic gates. They use radio frequencies to send signals to a receiver connected to the gate motor. Once the gate remote programming is done, the remote can command the motor to open or close the gate.

Gate remotes often feature rolling code technology for enhanced security, ensuring that the signal transmitted changes every time the remote is used, preventing unauthorised access.

Benefits of Gate Remotes

  1. Convenience:
    Gate remotes make operating your gate effortless, saving you time and effort, especially during bad weather or late at night.
  2. Enhanced Security:
    Features like rolling codes and encrypted signals make gate remotes a secure option, reducing the risk of signal theft or unauthorised duplication.
  3. Customisability:
    Many gate remotes can control multiple gates or garage doors, offering a streamlined solution for properties with various access points.
  4. Compatibility with Modern Systems:
    Most gate remotes can integrate with smart home systems, allowing for remote operation through your smartphone or other connected devices.

Step-by-step guide to gate remote programming for each gate motor

1. Hansa Speedo

  1. Open the motor cover to access the control panel.
  2. Locate the “Learn” or “Remote Programming” button.
  3. Press and hold the button until the LED light starts flashing.
  4. Press the button on your remote that you want to program.
  5. The LED will confirm by flashing rapidly, then turning solid.
  6. Test the remote by pressing the button to check if the gate responds.

2. Centurion D2 Turbo

  1. Open the gate motor housing.
  2. Locate the remote learn button on the control board.
  3. Press and hold the remote learn button until the LED indicator lights up.
  4. Press the button on the remote that you want to pair.
  5. The LED light will blink to confirm successful pairing.
  6. Close the housing and test the remote.

3. ET Drive 300

  1. Open the control panel on the gate motor.
  2. Find the “Learn” or “Prog” button.
  3. Press and hold the button until the LED flashes.
  4. Press the button on the remote you wish to program.
  5. Wait for the LED to confirm by blinking.
  6. Test the remote by pressing it to see if the gate responds.

4. Centurion D5 Evo

  1. Remove the cover of the D5 Evo motor.
  2. Locate the control board and find the “Learn” button.
  3. Press the “Learn” button once (do not hold).
  4. Press the button on the remote you wish to program.
  5. Wait for the LED to flash, indicating that the remote has been stored.
  6. Press the remote button again to test if the gate operates.

5. Gemini 12AH

  1. Open the gate motor control box.
  2. Find the receiver module and locate the “Learn” button.
  3. Press and hold the “Learn” button until the LED light turns on.
  4. Press and hold the button on the remote you wish to program.
  5. The LED will blink and then turn off, indicating the remote has been stored.
  6. Close the box and test the remote.

6. Centurion D5 Smart

  1. Open the control panel of the gate motor.
  2. On the LCD screen, navigate to “Remote Controls” in the settings menu.
  3. Select “Learn New Remote.”
  4. Press the button on the remote that you want to program.
  5. The system will display a confirmation message.
  6. Exit the menu and test the remote.

7. Centurion D10 Turbo

  1. Open the control box of the gate motor.
  2. Locate the “Learn” button on the control board.
  3. Press the “Learn” button once (do not hold).
  4. Press the remote button you wish to program.
  5. The LED indicator will flash to confirm successful programming.
  6. Test the remote by pressing it to see if the gate responds.

8. ET Drive 500

  1. Open the control panel.
  2. Locate the “Prog” or “Learn” button.
  3. Press and hold the “Learn” button until the LED flashes.
  4. Press the button on the remote.
  5. Wait for confirmation from the LED.
  6. Test the remote to ensure it works.

9. Centurion D10

  1. Open the gate motor cover.
  2. Find the “Learn” button on the control board.
  3. Press the “Learn” button once.
  4. Press the button on the remote you want to pair.
  5. Wait for the LED confirmation.
  6. Test the remote.

10. ET Drive 600

  1. Open the control panel.
  2. Find the “Prog” button.
  3. Press and hold until the LED blinks.
  4. Press the remote button.
  5. Wait for LED confirmation.
  6. Test the remote.

11. ET Drive 1000

  1. Open the control panel.
  2. Find the “Learn” button.
  3. Press and hold the button until the LED flashes.
  4. Press the button on the remote you wish to program.
  5. Release and wait for confirmation from the LED.
  6. Test the remote.

12. Centurion A10

  1. Remove the cover of the gate motor.
  2. Locate the “Learn” button on the receiver board.
  3. Press the “Learn” button once.
  4. Press and hold the button on the remote.
  5. The LED indicator will confirm with a flash.
  6. Test the remote.

13. Centurion D10 Smart

  1. Open the control panel of the D10 Smart.
  2. Use the LCD screen to navigate to “Remote Programming.”
  3. Select “Add Remote.”
  4. Press the button on the remote you wish to pair.
  5. Wait for the confirmation message.
  6. Exit the menu and test the remote.

14. Centurion D10 Turbo Smart

  1. Open the motor’s control panel.
  2. Access the LCD menu and navigate to “Remote Setup.”
  3. Select “Learn New Remote.”
  4. Press the button on the remote to store it.
  5. The LCD will confirm the successful pairing.
  6. Test the remote.

15. Centurion D20 Smart

  1. Open the control panel of the D20 Smart motor.
  2. On the LCD screen, navigate to “Remote Control Setup.”
  3. Select “Add Remote.”
  4. Press the remote button to pair it.
  5. The LCD will display a success message.
  6. Exit the menu and test the remote.

Step-by-Step Guide to Gate Remote Programming for other gate remotes

Step 1: Understand Your Gate Motor System
Identify the brand and model of your gate motor, as programming steps may vary. Check the user manual for specific instructions. If you don’t have one, visit the manufacturer’s website for guidance.

Step 2: Locate the Receiver
The receiver is usually built into the gate motor or mounted nearby. It’s the component that communicates with your remote. Open the motor casing to access the receiver if needed.

Step 3: Activate Learning Mode
Most gate motors have a “Learn” or “Program” button on the receiver. Press and hold this button until the LED light begins to blink, signalling that the receiver is in learning mode.

Step 4: Pair the Remote
Press the button on your gate remote that you wish to program. The LED on the receiver should flash or change colour, indicating a successful pairing.

Step 5: Test the Remote
Exit programming mode by pressing the “Learn” button again or waiting for the receiver’s LED to stop flashing. Test the remote by pressing the programmed button to open or close the gate.

Step 6: Secure the System
Ensure that only authorised remotes are programmed by clearing previous codes if necessary. Consult the motor’s user manual for instructions on clearing old codes.

Troubleshooting Tips

  • Remote Not Working: Check the battery and replace it if necessary. Ensure that the remote is within the operational range of the receiver.
  • Gate Not Responding: Verify that the receiver is powered and functioning. Inspect for obstructions or mechanical issues with the gate.
  • Reprogramming Required: If your remote isn’t functioning after a power outage, it may need to be reprogrammed. Follow the steps above.

Conclusion

Gate remote programming can be straightforward, but issues may arise that require professional assistance. At Lockfront Automation, we specialise in gate automation services, including remote programming, system upgrades, and repairs. Our team ensures your system operates seamlessly and securely. Contact us today for expert support tailored to your needs.

FAQ

How do I program my remote to my gate?

To program a gate remote, locate the receiver in your gate motor, activate its learning mode, and pair the remote by pressing the desired button. Refer to your motor’s user manual for specific steps.

How to reset the gate opener remote?

Resetting a remote usually involves clearing the codes on the receiver and reprogramming the remote. Follow your motor’s manual for detailed instructions.

How do I reboot my remote?

Most remotes don’t require a reboot. If it malfunctions, check the battery or reprogram it using the steps outlined above.

Why is my gate not responding to the remote?

Common reasons include a dead remote battery, misaligned sensors, or interference with the radio signal. Inspect the motor and receiver for potential issues.

Get a quick quote