Sliding Gate Motors
Whatever your need we will help you find and install the right motor for the job. Automate entrance gates to your home, business or industrial site with the expert support of Lockfront Automation’s range of sliding gate motors.
ET Drive 300
ET Nice’s Drive 300 motor is a full featured, low cost solution for automating residential sliding gates up to 300 kgs. The Drive 300 boasts a strong, durable electric motor with a full battery backup and removable brushes for easy maintenance. It has a small installation footprint which makes it good for installations where there is limited space is available.
Input voltage: | 220-240 Vac, 50Hz-60Hz |
Primary power supply to electric motor: | 24V Battery |
Maximum duty cycle with 220V present: | 25% (at 100N running thrust; battery health dependent) |
Standard Battery: | 24V 3.5Ah |
Number of operations on battery power only: | 100 within 24 hours (From a fully charged and healthy 3.5Ah battery) |
Battery charger: | Multi- stage intelligent charger, with temperature compensation. 350mA |
Rated gate mass: | 300kg |
Maximum travel length: | 25m |
Rated starting thrust: | 200N |
Rated running thrust: | 100N |
Maximum speed: | Up to 25m/min (gate load and battery health dependent) |
Anti-crushing safety sensing: | Yes – Electronic gate load profiling |
Auxiliary power supply for ancillary devices: | 12Vdc Electronically protected to 400mA |
Built in receiver frequency: | 433.92MHz |
Built in receiver format: | ET BLU MIX ® backward compatible with ET BLUE (Rolling code) |
Built in receiver memory capacity: | 32 user memory x 4 functions each |
Receiver functions: | Button trigger, pedestrian, auxiliary relay, and holiday lock-out |
Alarm monitoring: | Safety beam tampering and gate forced open |
Ancillary inputs: | Button trigger, pedestrian, safety beam |
Auxiliary relay options: | Courtesy light mode, electric lock mode, receiver relay mode or alarm mode |
Auto-close modes: | Simple auto-close, Condominium, Passive Infra-Red Access Control (P.I.R.A.C), Condo PIRAC |
Pedestrian mode: | Either auto-close or 3 step logic |
Programming dashboard: | 3-digit 7 segment LED display |
Operating temperature: | -10˚ to 50˚ Celsius |
Centurion D5 Evo
The D5 Evo is Centurion systems tried and tested sliding gate motor, ideal for domestic and light-industrial applications. The potent D5 Evo is a significant upgrade of its predecessor and now includes a reliable backup battery and convenient LCD controller for quick and hassle-free configuration.
The D5 Evo comes in a standard and low-voltage model.
- An integrated 12v 7AH battery backup
- Onboard multichannel NOVA receiver with 1500 button memory
- Unparalleled implantation flexibility with multiple modes of operation and gate operating parameters; including ability to program different remote buttons to perform different open and close functions.
- Pillar light control with pre-flash, alarm integration functions and positive close mode
- Real time clock and calendar to enable time-based features provided by Centurion’s ChronoGuard
- Upgrade options include solar and to alert of gate activity via SMS or push notification when connecting a Centurion GSM device
Technical Specifications:
D5 Evo Standard | D5 Evo Low Voltage | |
Input voltage | 90V AC +/-10% @50Hz | 15V – 19V AC
21V – 26V DC |
Current consumption (mains) | 170mA | NA |
Maximum numbers of daily operations | 150 | 55 |
Duty Cycle – Main present | 50% | 20% |
Operations in standby with 7Ah battery
Half day Full day |
44 35 |
|
Current consumption (motor at rated load) | 10A | |
Motor voltage | 12V DC | |
Motor push force – starting | 30kgf | |
Motor push force – rated | 17kgf | |
Gate mass – Maximum | 500kg | |
Gate length – Maximum | 100m | |
Gate speed (varies with load) | 18 – 22m/min | |
Manual Override | Lockable with key release | |
Collision Sensing | Electronic | |
Operating temperature range | -15°C to +50°C | |
Onboard receiving type | Centurion code-hopping multichannel receiver with selective add and delete | |
Receiver code storage capacity | 500 transmitter buttons | |
Receiver frequency | 433MHz | |
Degree of protection | IP55 | |
Mass unit packed
(with standard kit, but excl. rack and battery) |
10kg | |
Packing dimension
(with standard kit, but excl. rack and battery) |
303mm wide x 231mm deep x 432mm high |
Gemini 12AH
Gemini’s 12V DC sliding gate motor is a simple to install, hassle free solution for residential sliding gates. Gemini’s 12Ah sets itself apart by sporting a 12Ah battery enabling it to last longer without power than the more commonly used 7Ah battery options.
Technical Specifications”
Motor | 12 Volt DC |
Motor Size | 12 Watt |
Gearbox | Oil filled worm drive |
Gear Ratio | 33 to 1 |
Pull Force | 20 Kgf |
Openings ** | 60 per day |
Gate/Door Speed | 22 meter/min |
Obstruction Sensing | Electronic Adjustable |
Activation | N/O Electrical circuit |
OTHER FEATURES | · Auto close adjustable time (2-60 secs)
· LED Display mode · Optional buzzer during operation available · IRB sensing connection · Pedestrian facility · Mechanical override · Battery operated · Soft start and stop · Townhouse option · Direct change option · On board receiver max 30 remotes · Courtesy light facility · GSM compatibility |
Battery | 12 Volt – 12 Ah |
Electrical Consumption | 220-260 Volt 150 Mill amps |
Duty Cycle | 75% |
Centurion D5 Smart
The D5 Smart is Centurion’s latest innovation in sliding gate automation, giving you everything from intelligent reporting to an easy to use mobile-based setup and operation. It is ideally suited for residential applications and works equally well in light-industrial or commercial applications where light gates (up to 500Kgs) are installed.
- Speed! This motor balances safety and security by operating at up to 36 meters per minute
- Wireless user interface for effortless setup and configuration from your smartphone, including advanced diagnostic feedback, with intelligent logging and reporting
- Onboard multichannel NOVA receiver with 1500 button memory
- Dual 7AH battery backup with an intelligent battery charger that has onboard diagnostics and SMART communication between the charger and the controller
- A new and improved theft-resistant cage with a patented design offering outstanding security and peace of mind
Technical Specifications
Input voltage | 90V – 240V AC +/-10% @ 50Hz |
Motor voltage | 24V DC |
Motor power supply | Battery-driven (Standard Capacity – 2x12V) |
Motor push force – starting | 30kgf |
Motor push force – rated | 17kgf |
Gate speed (varies with load) | Up to 36m/min @ 17kgf |
Duty cycle – Mains present [*] | 50% |
Daily Operations – Max | 150 |
Gate mass – Max | 500kg |
Gate length – Max | 100m |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete |
Current consumption (Mains) | 200mA |
Current consumption (motor at rated load) | 13A |
Battery charger current output | 1.3A |
Input / Output sink currents (Max accessory current draw)* | |
I/O 1-4 | 100mA (12/24V) |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse |
Manual Override | Lockable with key release |
Operations in standby with 6Ah battery | |
Half day [**] | 44 |
Full day [**] | 35 |
Collision Sensing | Electronic |
Operating temperature range | -15°C to +50°C |
Receiver code storage capacity | 1500 Remotes |
Receiver frequency | 433.92MHz |
Degree of protection | IP55 |
Mass of unit packed (with standard kit, but excl. rack and battery) | 9.1kg |
Packaging dimensions (with standard kit, but excl. rack and battery | 325mm wide x 244mm deep x 445mm high |
* | Based on 25°C ambient temperature and unit not in direct sunlight |
** | Based on 4m gate, excluding all accessories |
Can increase battery capacity for longer standby times |
ET Drive 500
ET Nice’s Drive 500 motor is a full featured automation solution for residential sliding gates up to 500 kgs. The Drive 500 boasts a highspeed electric motor with a full battery backup and removable brushes for easy maintenance. The Drive 500 includes a gate and beam tampering alarm and pin code lockable programming.
- Robust and reliable residential slide gate automation
- High Speed motor with removable brushes
- Advanced Electronics with large backlit display for easy programming, diagnostics, and fault reporting
- Gate and beam tamper alarm monitoring
- Pin code lockable programming
- ET-Blu Mix enhanced rolling code receiver on board.
Technical Specifications
Input voltage: (Standard kit option) | 16v or 230v AC, 50Hz-60Hz |
Primary power supply to electric motor: | Battery dependent (12V 7,5Ah) |
Maximum duty cycle (work rate) with mains present: | 25% |
Number of operations on battery reserve without AC mains present: | 100 within the first 24h of power failure |
Maximum gate mass: | 500kg |
Maximum gate leaf length applicable to performances specified here: | 5m |
Rated gate load: | 180N |
Rated gate speed: | 28m/min |
Built-in receiver: | 434Mhz, 4 channel, ET BLU MIX ® Enhanced rolling code. 1000 user capacity |
ET Drive 600
ET Nice’s Drive 600 motor is designed for high traffic applications with a true battery backup system. The Drive 600 has a proven track record in commercial and light industrial applications with sliding gates up to 500Kgs. It can also be fitted with an optional heavy-duty security bracket.
- Proven power pack for high-traffic application with true battery backup
- High Speed motor with removable brushes
- Advanced Electronics with large backlit display for easy programming, diagnostics, and fault reporting
- Gate and beam tamper alarm monitoring
- Pin code lockable programming
- ET-Blu Mix enhanced rolling code receiver on board.
Technical Specifications
Input voltage: (Standard kit option) | 230v AC, 50Hz-60Hz |
Primary power supply to electric motor: | ACDC Power Pack with battery as back-up only (12V 7,5Ah) |
Maximum duty cycle (work rate) with mains present: | 98% |
Number of operations on battery reserve without AC mains present: | 100 within the first 24h of power failure |
Maximum gate mass: | 500kg |
Maximum gate leaf length applicable to performances specified here: | 5m |
Rated gate load: | 180N |
Rated gate speed: | 30m/min |
Built-in receiver: | 434Mhz, 4 channel, ET BLU MIX ® Enhanced rolling code. 1000 user capacity |
ET Drive 1000
The Drive 1000 is ET Nice’s solution for high traffic industrial sliding gates up to 1000kgs. The Drive 1000’s heavy duty, robust design provides reliable high-speed service with intelligent control. Designed to house up to 2 x 24v 3.5ah batteries and allowance for up to 1000 programmed remotes with 4 channels each, the Drive 1000 promises many years of reliable service.
Input voltage: | 220 – 240Vac @ 50Hz – 60Hz | |
Primary power supply to electric motor: | 288VA toroidal transformer (Power Pack) | |
Maximum duty cycle with 220V present: | 98%* | |
Standard Battery: | 24V 3.5Ah | |
Motor power | 24Vdc, 250W | |
Battery | 24Volt 5Ah | |
Number of operations on battery reserve without 220Volt present: | 100 within 24 hours | |
Battery charger: | Built in multiple stage with cycling and battery health monitor | |
Maximum gate mass: | 1000kg | |
Rated starting thrust: | 500N | |
Rated running thrust: | 400N | |
Maximum gate travel: | 40m | |
Maximum gate speed: | 28m/min* | |
Anti-crushing safety sensing: | Yes – Electronic gate profiling | |
Built-in receiver frequency | 433.2 MHz | |
Receiver format: | E.T. BLU MIX © backward compatible with E.T. BLUE (Rolling code) | |
Receiver memory capacity: | 1000 users – 4 channels each | |
4 receiver channels: | Button trigger, pedestrian, auxiliary relay, holiday lock-out | |
Tamper alarm monitoring: | Safety beam tampering, gate forced open and gate kept open monitoring | |
Ancillary connections: | Either traditional switched wiring or 2 wire daisy chained NICE BlueBus | |
Auxiliary power supply output: | 12Vdc @ 400mA, electronically protected | |
Auto-close modes: | Simple auto-close, Condominium or Passive Infra-red Access Control (PIRAC) | |
Pedestrian mode: | Either auto-close or 2 step logic | |
Operating temperature range: | -10 to 50° C (14F to 122F) |
Centurion D10 Smart
D10 SMART industrial and commercial sliding gate motor – Suitable for gates weighing up to 1000kg. Up to 750 daily operations. 24V battery backup.
- Heavy Duty industrial sliding gate motor – suitable for gates weighing up to 1t with 750 daily operations
- Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
- More space and dedicated accessory tray for complementary solutions such as GSM devices
- World-class reliability with a sealed gearbox and improved, more secure manual release mechanism
- Die-cast aluminium gearbox coupled with a high-torque DC motor built for pure power and performance
- Uncompromising security, uninterrupted convenience with 24V battery backup
- Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
- Accurate and safe position control incorporating reliable Hall Effect technology
- Improved wire routing
- SMART universal controller – compatible with all CENTURION SMART solution
- SMART hardware and SMART connectivity provide the best experience for installers
Technical Specifications
D10-SMART | |
Input voltage | 90V – 240V AC +/-10% @ 50Hz 1 |
Current consumption (Mains) | 250mA |
Battery charger current output | 1.8A @ 27.4V +/-1% |
Maximum number of operations per day | 750 (3,6) |
Duty cycle – Mains present (2,3) | 45% |
Motor voltage | 24V DC |
Motor power supply | Battery-driven (Standard Capacity – 2x 12V 7.2Ah) |
Current consumption (motor at rated load) | 8A |
Input / Output sink currents (Max accessory current draw) | |
I/O 1-4 | 100mA (12/24V) |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse |
Motor push force – starting | 40Kgf |
Motor push force – rated | 30Kgf |
Gate mass – maximum | 1000Kg |
Gate length – maximum | 50m |
Gate speed (varies with load)4 | Up to 26m/min4 |
Manual Override | Lockable with key release |
Drive Pinion | 17T Module 4 |
Operations in standby with 2x 7Ah batteries | Power saving (15m/min 15kgf) Normal (26m/min 15kgf) |
Half day (2,5,6) | 118 | 63 |
Full day (2,5,6) | 93 | 50 |
Collision Sensing | Electronic |
Operating temperature range | -15°C to +50°C |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete |
Receiver code storage capacity | 1500 Remotes 7 |
Receiver frequency | 433.92MHz |
Degree of protection | IP54 |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
- Can operate off a solar supply, consult your local dealer for assistance
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
- Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses
Centurion D10 Turbo Smart
D10 Turbo Smart – high-speed, high-security sliding gate motor
Introducing the all-new, lightning-fast and intelligent D10 Turbo SMART light-industrial and residential sliding gate motor, the high-velocity sprinter that combines our most innovative technology with awe-inspiring speed to deliver a solution that leaves others in its dust
- Turbo speed for the best security and convenience
- SMART hardware and SMART connectivity provide the best experience for installers
- More space and dedicated accessory tray for complementary solutions such as GSM devices
- Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
- Die-cast aluminium gearbox coupled with a high-torque DC motor built for speed and performance
- Uncompromising security, uninterrupted convenience with 24V battery backup
- Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
- Accurate and safe position control incorporating reliable Hall Effect technology
Technical Specifications
D10-SMART | |
Input voltage | 90V – 240V AC +/-10% @ 50Hz 1 |
Current consumption (Mains) | 250mA |
Battery charger current output | 1.8A @ 27.4V +/-1% |
Maximum number of operations per day | 750 (3,6) |
Duty cycle – Mains present (2,3) | 25% |
Motor voltage | 24V DC |
Motor power supply | Battery-driven (Standard Capacity – 2x 12V 7.2Ah) |
Current consumption (motor at rated load) | 10A |
Input / Output sink currents (Max accessory current draw) | |
I/O 1-4 | 100mA (12/24V) |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse |
Motor push force – starting | 24Kgf |
Motor push force – rated | 18Kgf |
Gate mass – maximum | 250Kg |
Gate length – maximum | 50m |
Gate speed (varies with load) 4 | Up to 45m/min 8 |
Manual Override | Lockable with key release |
Drive Pinion | 20T Module 4 |
Operations in standby with 2x 7Ah batteries | Power saving (15m/min 9kgf) Normal (45m/min 9kgf) |
Half day (2,5,6) | 189 | 130 |
Full day (2,5,6) | 150 | 104 |
Collision Sensing | Electronic |
Operating temperature range | -15°C to +50°C |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete |
Receiver code storage capacity | 1500 Remotes 7 |
Receiver frequency | 433.92MHz |
Degree of protection | IP54 |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13.5Kg |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
- Can operate off a solar supply, consult your local dealer for assistance
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
- Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses
Centurion D20 Smart
D20 SMART sliding gate motor for heavy gates
Introducing the brand new D20 SMART industrial sliding gate motor.
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
TECHNICAL SPECIFICATION
D20 SMART | |
Input voltage | 90V – 240V AC +/-10% @ 50Hz1 |
Current consumption (Mains) | 250mA |
Battery charger current output | 1.8A @ 27.4V +/-1% |
Maximum number of operations per day | 750.25 |
Duty cycle – Mains present (2,3) | 45% |
Motor voltage | 24V DC |
Motor power supply | Battery-driven (Standard Capacity – 2x 7.2Ah) 3 |
Current consumption (motor at rated load) | 9A |
Input / Output sink currents (Max accessory current draw) | |
I/O 1-4 | 100mA (12/24V) |
I/O 5 and 6 | 3A (12/24V) 10sec Pulse |
Motor push force – starting | 52kgf |
Motor push force – rated | 39kgf |
Gate mass – maximum | 2000kg |
Gate length – maximum | 25m |
Gate speed (varies with load) (2,5) | Up to 18m/min 3 |
Manual Override | Lockable lever with key release |
Drive Pinion | 13T Module 4 |
Operations in standby with 2x 7.2Ah batteries | Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) |
Half day (2, 3, 4) | 101 | 55 |
Full day (2, 3, 4) | 80 | 45 |
Collision Sensing | Electronic |
Operating temperature range | -15°C to +50°C |
Onboard receiver type | CENTURION rolling code (Keelog encryption) multichannel |
Receiver code storage capacity | 1500 Remotes 6 |
Receiver frequency | 433.92MHz |
Degree of protection | IP54 |
Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg |
Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
- Can operate off a solar supply, consult your local dealer for assistance.
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
Centurion D2 Turbo
The D2 Turbo is Centurion systems all-in-one solution for a standard, four metre domestic sliding gate. This cost-effective, easy to install sliding gate motor is ideal for domestic gates weighing up to 250kgs. The D2 Turbo will deliver outstanding reliability, comprehensive functionality and a selectable high-security or standard speed installation.
The D2 Turbo comes in 2 models: a standard and low-volage model. The low-voltage model is designed for sites with no mains power at the gate installation site, allowing for lower cost installation using a low-voltage step-down transformer or solar power supply.
- Reliable battery backup with a dedicated solar mode.
- Turbo speed for greater security and convenience
- Quicky and easy to install, with an intuitive configurable controller that has all settings easily available via two dials
- Integrated, onboard multichannel Centurion receiver.
- Adaptive Collision Sensing.
- Modular components clip together for easy maintenance.
- Lockable, easy Manual Override.
- A robust steel pinion, designed for increased durability and reliable operation
Technical Specifications:
D2 Turbo | D2 Turbo Low voltage | ||
Input voltage | 90V– 240V AC ±10% @50Hz | 10V – 20V AC ±10% @50Hz 10V – 28V DC | |
Motor voltage | 12V DC | 12V DC | |
Motor power supply | Battery-driven (standard capacity – 12V 5Ah) | ||
Current consumption (mains) | Intergral with controller 1A @ 13.7V +/- 1% | Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC) | |
Current consumption (motor at rated load) | 8/12A | ||
Current consumption (quiescent load) | 95mA | ||
Operator push force | |||
Starting | 18kgf | ||
Rated | 8kgf | ||
Gate mass – maximum | 250kg | ||
Gate length – maximum | 20m | ||
Gate speed – m/min 6 | 22 – 26m/min | ||
Gate speed – mm/sec | 367 – 433mm/sec | ||
Drive Pinion | 17T Module 4 | ||
Maximum daily cycle | 10 cycles/day | ||
Design life | 30 000 cycles | ||
Operations in standby with standard battery | |||
Half day | 60 cycles | ||
Full day | 40 cycles | ||
Collision sensing | Electronic | ||
Degree of protection | IP54 | ||
Controller incorporated | D2 Controller_H | D2 Controller_L | |
Onboard receiver type | NOVA code-hopping onboard, multichannel | ||
Receiver code storage capacity | 32 transmitter buttons |
Hansa Speedo
Nice’s Hansa Speedo sliding gate motor is well suited for residential and light industrial applications. The Speedo’s fast open and closing action with a soft start and stop facility is designed to support up to 175 daily open cycles. The integrated 24v battery backup and loop detector facility make it a good option for installation in security estates and residential complexes.
- Heavy duty design for light industrial sliding gate automation
- Soft start/stop facility
- LED array and display for indication of gate motor status
- General purpose relay and optional plug in receiver, allowing for connections to other home automation equipment.
- Battery back-up
- Loop detector facility
- ET-Blu Mix® enhanced rolling code SMXI receiver- uncrackable, unbackable
Technical Specifications
Gate Weight in kg | Up to 800 |
Electrical Data | |
Electrical Power (Vac 50Hz) | 230 |
Motor Power (Vdc) | 24 |
Absorption at nominal load (A) | 11 |
Power (W) | 260 |
Performance Data | |
Speed at 0 load (m/min) | 19 |
Pull force at nominal load (N) | 300 |
Duty cycle (cycle/day) | 175 |
Dimensions and General Data | |
Degree of protection (IP) | 44 |
Operating temperature (°C Min/Max) | -20 +50 |
Dimensions Motor (mm) | 345 x 240 x 380 |
Weight Motor (kg) | 16 |
Dimensions Base Plate (mm) | 400 x 250 x 4 |
Weight Base Plate (kg) | 3.2 |
Centurion D10
Centurion’s D10 industrial sliding gate motor is perfect for both commercial and industrial applications where heavy sliding gates are installed. The D10 differs from the D10 Turbo in that it has a higher push force specification for reliably opening heavy duty gates in commercial and industrial applications.
- Up to 500 paired remote buttons
- Dual 7AH battery backup
- Intelligent speed control, with smooth acceleration and deceleration
- High duty cycle capability, with up to 750 daily open cycles
- Intruder-detection alarm modes
- Code-hopping multichannel receiver with selective add and delete
- Integrated ChronoGuard timer functionality
- Upgrade options to alert you of gate activity via SMS or push notification when connecting a Centurion GSM device
Technical Specifications
Input Voltage | 90 – 24V AC, 50Hz |
Motor Voltage | 24V DC |
Motor Power Supply | Battery-driven – (standard capacity 2 x 7Ah) |
Push Force – Rated | 30kgf |
Gate Speed (varies with load) | 22 – 26m/min |
Duty Cycle – Mains Present | 45% [*] |
Daily Operations – Max | 750 [*] |
Gate Mass – Max | 1000kg |
Onboard Receiver Specification | Centurion code-hopping, multichannel, 433MHz, capacity – 500 transmitter buttons |
* | Based on 25°c ambient temperature and unit not in direct sunlight. |
Centurion D10 Turbo
Centurion’s D10 Turbo ensures that no time is wasted and is the ideal sliding gate motor for applications were owners are seriously concerned about security or simply in a rush to get things done.
- Up to 500 paired remote buttons
- Dual 7AH battery backup
- Intelligent speed control, with speeds of up to 50 metres per minute, depending on the weight of the gate.
- High duty cycle capability, with up to 750 daily open cycles
- Intruder-detection alarm modes
- Code-hopping multichannel receiver with selective add and delete
- Integrated ChronoGuard timer functionality
- Upgrade options to alert you of gate activity via SMS or push notification when connecting a Centurion GSM device
Technical Specifications
Input Voltage | 90 – 24V AC, 50Hz |
Motor Voltage | 24V DC |
Motor Power Supply | Battery-driven – (standard capacity 2 x 7Ah) |
Push Force – Rated | 15kgf |
Gate Speed (varies with load) | 40 – 50m/min |
Duty Cycle – Mains Present | 25% [*] |
Daily Operations – Max | 750 [*] |
Gate Mass – Max | 240-1000kg (depending on speed settings) |
Onboard Receiver Specification | CENTURION code-hopping, multichannel, 433MHz, capacity – 500 transmitter buttons |
* | Based on 25°c ambient temperature and unit not in direct sunlight. |
Centurion A10
Centurion’s A10 is a heavy-duty, industrial sliding gate motor that is capable of handling sliding gates weighing up to 2 tonnes in arduous operating conditions. The A10’s industrial grade design ensures that the motor always runs efficiently and cool even in high-duty applications. It provides total speed control and makes for the fastest, smoothest starting and stopping of any sliding gate on the market in addition to extending the long-term reliability of the system.
The A10 comes in 2 different models: Endurance or Heavyweight, both models allow for many upgrade options, including additional battery back and solar power enabling even the most remote sites to enjoy the highest level of security and convenience.
Speak to a Lockfront Automation expert to choose the right solution for your requirements.
Key features include:
- Extremely high push force.
- Extremely rapid operating speed with intelligent and smooth speed control.
- Optional DC Converter for reliable battery backup with on-demand battery backup protection.
- Brown-out power failure detection.
- Battery-protection circuitry and an integrated battery charger.
- Upgrade options include solar and to alert of gate activity via SMS or push notification when connecting a Centurion GSM device
Technical Specifications
A10 Endurance | A10 Heavyweight | |
Input Voltage | 220 – 240V AC +/- 10%, 50Hz (single phase) | 220 – 240V AC +/- 10%, 50Hz (single phase) |
Motor Voltage | 380V AC Three-Phase | 380V AC Three-Phase |
Push Force – Rated Standard Speed | 30kgf | 30kgf |
Push Force – Rated Sprint Speed | 22.5kgf | NA |
Gate Speed at Rated Push Force – Standard Speed | 16m/min | 13.6m/min |
Gate Speed at Rated Push Force – Sprint Speed | 30m/min | NA |
Duty Cycle | 80% [*] | |
Daily Operations – Max | 750 [*] | |
Gate Mass – Max – Standard Speed | 1000kg | 2000kg |
Gate Mass – Max – Sprint Speed | 600kg | N/A |
* | Based on 25°c ambient temperature and unit not in direct sunlight. |
Speak to a Lockfront Automation expert to discuss Solar power and DC Converter options and specifications